FD3.0-1000 1KW Wind Turbine System
|
Numbers of Blade |
3 pcs |
|
Material of Blade |
FRP Complex Resin |
|
Diameter of Wind Rotor |
3.0m |
|
Start (out-in) wind speed |
3m/s |
|
Working wind speed |
3-18m/s |
|
Rated speed |
400 rpm |
|
Security wind speed |
45m/s |
|
Wind energy ratio |
40% |
|
Generator |
Three phase
Permanent magnet generator |
|
Generator rated power |
1000w |
|
Max output power |
1200w |
|
Charging voltage |
48Vdc |
|
Output voltage of Inverter |
Single phase 220-240Vac/50HZ
110-130Vac /60HZ |
|
Stop method |
Stop by tail-vane yawing 60-900 |
|
Wind direction tracking method |
By tail-vane mechanical adjustment |
|
Speed adjustment method |
By tail-vane mechanical adjustment |
|
Protect method |
Intelligent control full-automatically |
|
Tower type |
Painting /Galvanized guyed wires tower |
|
Tower height & weight |
6m/ 80kgs |
|
Charging control |
Intelligent control full-automatically |
|
Inverter power supply |
Pure sine wave |
|
Battery Matching (for off-grid wind system) |
4pcs 12Vdc-120/150AH Lead-acid or colloid batteries |
|
Grid tied inverter matching
(For on-grid wind system) |
Input: 48Vdc
Output: 240Vac single phase
Recommend : SMA WB1100A (one pcs) |
|
Time of charging (off-grid type) |
About 18 hours |
|
Annual power generation |
About 2880KWH ( annual average wind speed above 5m/s ) |
|
Packing details |
|
|
Total packages |
4pkgs |
|
Total N.W / G.W |
190kgs / 200kgs |
|
Total Volume |
0.65 CBM |
